Measuring spores under the microscope
Spore size and shape are among the most useful characters in fungal taxonomy. A good measurement takes a calibrated scope, a clean mount and enough spores to describe the spread, not just one typical spore.
What you need
- A compound microscope with a 100× oil-immersion objective
- An ocular (eyepiece) micrometer
- A stage micrometer, which is a slide with a ruled scale, usually 0.01 mm divisions
- Slides, coverslips and immersion oil
- A mounting medium: water for a quick look, or 3–5% KOH to rehydrate and clear
1. Calibrate the ocular micrometer
The eyepiece scale has arbitrary divisions. To turn them into micrometres, line the eyepiece scale up beside the stage micrometer at 1000× and count how many eyepiece divisions span a known distance. If 40 eyepiece divisions cover 0.10 mm (100 µm), each division is 2.5 µm. Calibrate separately for every objective, and again if you change eyepieces.
2. Make a clean mount
Use very little sample. A crowded slide hides the outline of each spore and makes overlaps look like larger spores. Add a drop of mounting medium, lower the coverslip without trapping bubbles, and add oil to the coverslip.
3. Measure enough spores
Measure at least 20 spores, and 30 or more if the sample allows. Measure only spores in side view and lying flat, and skip any that are folded, collapsed or still attached to a basidium unless you are recording that. For each spore record length (L) and width (W).
4. Report the numbers
| Value | How to get it |
|---|---|
| Range | Smallest to largest length, and smallest to largest width |
| Mean | Average length and average width |
| Q | Length divided by width for each spore. Report the range of Q and the mean |
| n | How many spores you measured, and from how many samples |
A typical entry reads: spores 9.5–12.0 × 6.0–7.5 µm, mean 10.7 × 6.8 µm, Q = 1.4–1.8, mean Q = 1.57 (n = 30).
Common sources of error
- Uncalibrated or recalibrated scale. Re-check calibration whenever optics change.
- Mounting medium. Spores can swell or shrink in different media, so state which one you used.
- Measuring only the best spores. Pick spores at random, not the biggest.
- Mixed samples. Measure from a single source so one species is not mixed with another.
Photograph the spores next to the micrometer scale so your measurements can be checked later.